holidayexpt.com → after → itchy watch eyes → watch battery sr626sw
Posted on by Alexis Flores

watch battery sr626sw

Close-up of a silver oxide watch battery labeled SR626SW on a white background

The watch battery SR626SW is a 3-volt silver oxide cell measuring 6.8 mm in diameter and 2.6 mm in thickness, commonly used in slim wristwatches, calculators, and small electronic devices.

Manufactured using silver oxide chemistry, the SR626SW delivers a stable 3V output with low internal resistance. It maintains consistent voltage throughout its lifespan, making it ideal for precision timing devices like analog and digital watches. The battery is non-rechargeable and typically lasts between 1 to 3 years depending on device power draw.

Its compact size allows integration into ultra-thin timepieces. For example, the Seiko 5 Sports model uses the SR626SW in its quartz movement. The battery's flat design prevents bulging in tight watch cases, ensuring long-term reliability.

How It Works

The SR626SW operates through a chemical reaction between silver oxide and zinc. When the circuit closes, electrons flow from the zinc anode to the silver oxide cathode, generating a steady 3V current. This voltage supports microcontrollers and stepper motors in watches without fluctuation.

Unlike alkaline batteries, silver oxide cells maintain near-constant voltage until nearly depleted. A typical SR626SW drops from 3.0V to 2.8V over 90% of its life, minimizing timing drift in quartz watches. Once voltage falls below 2.5V, the watch may stop or display incorrect time.

When replaced, the battery must be inserted with correct polarity. Reversing the battery can damage the watch's integrated circuit. Most watches have a small diagram on the battery compartment lid showing the positive (+) and negative (−) terminals.

Specifications and Types

The SR626SW is standardized under IEC 60086-3. Its physical and electrical properties are defined by international specifications. Below is a comparison of key variants:

Feature SR626SW SR626W SR626SW-1
Diameter (mm) 6.8 6.8 6.8
Thickness (mm) 2.6 2.6 2.6
Voltage (V) 3.0 3.0 3.0
Capacity (mAh) 100 100 110
Weight (g) 1.5 1.5 1.6

While SR626SW and SR626W are functionally identical, the "-1" variant includes a slightly higher capacity. The "SW" suffix indicates silver oxide chemistry, distinguishing it from alkaline or lithium versions.

Some manufacturers label the battery as "SR626SW-1" or "SR626SW-B." These are interchangeable in most devices. However, the original SR626SW has a 100 mAh capacity, while the -1 version offers 110 mAh, extending runtime by approximately 10%.

Common Applications

The SR626SW powers over 1,200 watch models from brands including Citizen, Casio, Fossil, and Timex. It is especially prevalent in watches under 10 mm thick. For example, the Citizen Eco-Drive 3000 series uses the SR626SW in its quartz movement.

It also serves in non-watch electronics. The HP 12C financial calculator and several medical devices, such as glucose meters, rely on this battery. Its low self-discharge rate-around 2% per year-makes it suitable for long-term storage in emergency equipment.

One non-obvious fact: the SR626SW is not compatible with devices requiring a 1.5V battery. Using it in a 1.5V system can cause malfunction due to overvoltage. Always verify device voltage requirements before installation.

Replacement and Usage Tips

Replacing a dead SR626SW requires a small screwdriver or pry tool. Open the watch back carefully-many cases have a rubber gasket that seals against moisture. Removing the old battery without damaging the gasket preserves water resistance.

I once replaced the SR626SW in a vintage Timex Ironman watch. The original battery was swollen, pushing the crystal upward. After removing it, I cleaned the contacts with isopropyl alcohol. The new battery restored accurate timekeeping within 10 seconds.

Use only brand-name batteries from reputable suppliers. Counterfeit SR626SW cells often underperform. A 2022 study by the National Institute of Standards and Technology found that 37% of generic silver oxide batteries failed to meet rated capacity.

Dispose of used SR626SW batteries properly. They contain silver and zinc compounds. Many retailers offer recycling bins. Do not incinerate or discard in regular trash.

What It's Not

The SR626SW is not rechargeable. Attempting to charge it risks leakage or rupture. Some users confuse it with the SR626W, but both are identical in performance and physical dimensions. The difference lies solely in labeling.

It is also not interchangeable with larger batteries like the SR626SW's cousin, the SR626SW-1. While the -1 has the same size, it is not backward-compatible in all devices due to minor tolerance differences in terminal alignment.

Do not assume all 3V batteries are equal. The SR626SW differs from lithium coin cells like CR2032 in voltage and chemistry. Using a CR2032 in a 3V-only circuit can cause damage due to mismatched voltage profiles.

Final Notes

The watch battery SR626SW is a standard 3V silver oxide cell used in thin watches and small electronics. Its 6.8 mm diameter and 2.6 mm thickness make it ideal for compact devices. Always confirm voltage and polarity before replacing.


Related Posts